air conditioning bedford
  Call: +44(0)845 5677080           E-mail: Info@orionair.co.uk
Back
Home
Up
Next

Industrial Heating

Batteries AGM and Gel
 
Marine Solar And Wind Kits
 
Cables and Connectors
 
Caravan Wind Turbine Kits
 
Educational Wind Turbine And Solar Kits
 
Green Power Junior Kit Renewable Educational Kit
 
Wind Turbine Off Grid Kits
 
Hydro Generators
 
Inverters
 
Mounting and Rigging
 
Charge Regulators
 
Solar PV Panel Grid Tie Kits
 
Grid Tie Inverters
 
Solar PV Panels
 
Weather Stations
 
Wind Turbines
 
Wind Turbine Grid Tie Kits
 
Air Source Heat pumps
 
Electric Heaters
 
Household
 
Water Pumps
 
Wind Turbine Spares

 

Karasouli ICC50 Wind Turbine Charge Controller 50A 12 or 24 Volts

 

New listing for December 2013

UK Designed And Manufactured 

Karasouli ICC50 Wind Turbine Charge Controller 50A Dual Battery

This Karasouli ICC50 offers a complete solution for charge controlling any type of small scale wind turbine and where two battery banks are present making it ideal for marine applications as well as land based. It has a LCD display showing operational modes and is easily user configurable to work at either 12 or 24 volts and comes in 50A power ratings to suite wind turbines up to 1500 watts on a 24 volt circuit. There is no need to match a dump load to the wind turbine as the delta modulated PWM will use as much or as little of the dump capacity to float the battery once it is fully charged. The added bonus of this controller is that it has dual charging outputs so the user can keep two battery banks charged, ideal for marine or leisure activities.

The ICC50 will bulk charge the battery at the full capacity of the wind turbine until the user set point is reached. It will then utilize the dumpload to float the battery at this voltage. Keeping the battery topped up, and dumping only excess power. The ICC50 also comes with data logging, call-generator output and wireless connectivity for monitoring and control. The addition of a bluetooth module means you can access the statistics of your turbine’s performance via the wireless bluetooth screen that is available or via the Karasouli android app, or the Karasouli PC application.


Key Product Features:

  • 12v / 24v operation
  • Up to 50A current capacity
  • Uses efficient delta modulated PWM to Bulk and Float Charge
  • No need to match dump load and turbine.
  • Dual output, keeping up to two battery banks charged
  • Data logging to a USB flash stick
  • Optional current logging functionality
  • Supplied in IP55 rated housing
  • Wireless screen/controls available
  • Rated to 750 Watts on a 12V circuit
  • Rated to 1500 Watts on a 24V Circuit

Specification:

PWM Data: 20 kHz PWM signal, variable at a resolution of 1%, adjusted at 2kHz
Current Draw: ~60mA
Factory Settings: Supplied set for 12v lead acid batteries. UpperChargeLimit : 14.8v
Maximum Input Current:  ICC50 :  50A
Minimum Battery Voltage : 10v
Connection: ICC50 : 57A Screw Terminals

 

arasouli ICC50 Wind Turbine Charge Controller 50A 12 or 24 Volts

UK Designed And Manufactured 

This Karasouli ICC50 offers a complete solution for charge controlling any type of small scale wind turbine and where two battery banks are present making it ideal for marine applications as well as land based. It has a LCD display showing operational modes and is easily user configurable to work at either 12 or 24 volts and comes in 50A power ratings to suite wind turbines up to 1500 watts on a 24 volt circuit. There is no need to match a dump load to the wind turbine as the delta modulated PWM will use as much or as little of the dump capacity to float the battery once it is fully charged. The added bonus of this controller is that it has dual charging outputs so the user can keep two battery banks charged, ideal for marine or leisure activities.

The ICC50 will bulk charge the battery at the full capacity of the wind turbine until the user set point is reached. It will then utilize the dumpload to float the battery at this voltage. Keeping the battery topped up, and dumping only excess power. The ICC50 also comes with data logging, call-generator output and wireless connectivity for monitoring and control. The addition of a bluetooth module means you can access the statistics of your turbine’s performance via the wireless bluetooth screen that is available or via the Karasouli android app, or the Karasouli PC application.


Key Product Features:
  • 12v / 24v operation
  • Up to 50A current capacity
  • Uses efficient delta modulated PWM to Bulk and Float Charge
  • No need to match dump load and turbine.
  • Dual output, keeping up to two battery banks charged
  • Data logging to a USB flash stick
  • Optional current logging functionality
  • Supplied in IP55 rated housing
  • Wireless screen/controls available
  • Rated to 750 Watts on a 12V circuit
  • Rated to 1500 Watts on a 24V Circuit

Specification:

PWM Data: 20 kHz PWM signal, variable at a resolution of 1%, adjusted at 2kHz
Current Draw: ~60mA
Factory Settings: Supplied set for 12v lead acid batteries. UpperChargeLimit : 14.8v
Maximum Input Current:  ICC50 :  50A
Minimum Battery Voltage : 10v
Connection: ICC50 : 57A Screw Terminals
- See more at: http://www.windtrap.co.uk/karasouli-icc50-wind-turbine-charge-controller-50a-dual-battery-505-p.asp#sthash.CCqFZItk.dpuf

                 

Call: +44(0)845 5677080          

E-mail: Info@orionair.co.uk

 


 

 

 


Orion Air Conditioning & Refrigeration Ltd, 10 Grisedale Court, Woburn Road Industrial Estate, Kempston, Bedfordshire, MK42 7EE, UK

Terms of Use | Privacy Statement | Accessibility

© Orion AC&R Ltd. All rights reserved

                                Created 09/12/13      

Last updated - 11/09/2014