|
Call: +44(0)1234 841221 E-mail: [email protected]
H
No
Longer A Stocked Item with 6 week lead time
High
Output Commercial/industrial Air Source Heat-pump Fortismore CFM125 (72
Kw / 240000 Btu) The CFM125 is a high
powered commercial/industrial air source heat-pump boiler with 72 kW /
240000 Btu output. The CFM125 air source heat-pump is effectively a
direct replacement for fossil fuel boilers with CO2 levels being
vastly reduced. The output temperature can reach up to 65 but the unit
has a internal electric heater which raises the temperature to 75 DegC
periodically. These systems have seen service within many commercial
buildings such as hotels, factories and offices but notably the
California Rain Forest Spa which installed 10 x CFM125 systems for the
swimming and spa areas. These units can also produce chilled water, all
that would be required is a separate chilled water tank (as in picture
below). The
latest UK models from all the major manufactures. Air source heat pumps
are a easy way of replacing a existing fossil fuel heating system. Off
the gas grid locations are particularly expensive to run especially when
oil is used and there is always a issue of a big oil tank which needs to
be sited on the property which can be unsightly. Air source heat pumps
have a outdoor condensing unit (heat collector) which collects the heat
from the ambient air. These can be fixed on a wall or level and
generally look exactly the same as a air conditioning system outdoor
condensing unit.
Products:
Air to Water Basics:
Related
News: Trianco
Activair Air Source Heat-pump S500 (5 KW / 18000 Btu) for DHW
(basic non-inverter type which requires a heat store water tank to
transfer heat to) (No Longer Available, Trianco went bust 2010)
Contact Us:Sales Installation and Service
UK: +44 (0)1234 841221
|
|
