This is a complete tower home wind turbine kit that comprising
of a 600watt wind turbine, tower and a WindMaster 500 grid-tie inverter. The wind
turbine is mounted on a tower and a standard pole which is supplied.
LE-600 Grid-Tie
Tower Kit Includes:
-
LE-300 Grid-Tie Wind Generator
-
Run/Stop Switch
-
Mastervolt Inverter
-
Tower Kit
LE-600 Grid-Tie Wind Generator - Specification:
| |
|
|
Rotor Diameter: |
1.54 metres |
|
Rotor Type: |
3-Blade downwind |
|
Blade Material: |
Glass Reinforced Nylon |
|
Rated Wind Velocity: |
7.20m/s (16.2mph) |
|
Rated Output: |
160 watts |
|
Peak Output: |
700 watts |
|
Cut-in speed: |
3m/s (6.7mph) |
|
Estimated AEP: |
250-1900kWh per year Depending on
site location & wind |
|
Weight: |
19.5Kg |
|
Generator Type: |
3-Phase Brushless NIB magnet rotor
out-runner PMA |
|
Output voltage: |
12, 24 or 48V |
|
Lifetime & Servicing |
20 years Annual inspection recommended |
|
Warranty |
2 years |
Guyed Tower:
A complete tower which has been designed to be shipped anywhere and set up
easily in any location,
Includes:
3 x 3 Metre Sections
8 x Guy Ropes
1 x Base Plate
4 x Ground Anochers
4 x Base Staple
8 x Rope Tensioner
1x Fixings and Accessories.
Run/Stop Switch:
This simple switch arrangement provides a safe and easy way of stopping the
turbine either during high winds, or for maintenance. When the switch is
thrown, the batteries are disconnected and the turbine is ‘shorted’ causing
the blades to rotate very slowly.
The Universal Run/Stop Switch is a solution designed to allow the user to
brake a turbine “dynamically”. Instead of supplying power to the load, the
switch activates a short circuit which effectively brakes the permanent magnet
alternator of the turbine. The Switch can also be used with turbines of
different manufacture as long as the following characteristics are present:
• 3-phase wild AC, not exceeding 500 V & 16 A
• Wild DC not exceeding 150 V & 10 A
• Mechanically and electrically capable of dynamic braking
Windmaster 500 (OEM product):
Windmaster 500 is a grid connected inverter for grid connection of small wind
turbines. The design is based on the successful Soladin 600 Solar inverter of
which more than 6000 units have been sold already. Windmaster 500 is an “OEM”
product and is sold as part of a system through selected system integrators.
The product is to be installed only with selected wind turbines. A system
evaluation is part of the qualification process.
Operation and Specification:
As the turbine charges the batteries, the State of Charge (SOC) and battery
voltage will rise. Once the batteries reach full capacity, the dump load
controller begins to bleed power from the turbine into the dump load. This
energy is then dissipated as heat into the surrounding environment.
